TOSHIBA LED Downlight 12 Watt Daylight/Cool White/Warm White 5 inches

Attribute:

SKU : FT-LED-DLT-145

TOSHIBA LED Downlight 12 Watt Daylight/Cool White/Warm White 5 inches

Brand : Toshiba

Share

Downlight LED TOSHIBA 12W Daylight/Cool White/Warm White 5 inches


 Change the atmosphere of room lighting at your fingertips. With TOSHIBA's 12W circular LED downlight, you can change the color tone of the light up to 3 colors (warm white, cool white and daylight) just by controlling the on-off with a light switch. It also has good heat dissipation. Provides constant brightness without flickering. ready to save energy Safe from UV and infrared rays, environmentally friendly, does not hurt the skin, easy to install, hassle-free and has a lifespan of up to 25,000 hours, suitable for indoor use. Help create a more diverse atmosphere.

 


feature

- Recessed LED downlight, size 12 watts, energy saving up to 85%

-There are 3 lights in 1 lamp (DAYLIGHT/COOL WHITE/WARM WHITE) just press the switch to turn on-off the light.

- Free from UV and infrared radiation. safe for skin

- Environmentally friendly No mercury that causes pollution

1020 lumens of brightness with a lifespan of up to 25,000 hours.

- Confident in quality, certified standard products TIS 1955-2551

- 1 year product warranty

 

 


 




LED Recessed Downlight 12W – Energy Saving up to 85%

✅ 3-in-1 Light Modes in a single fixture (Daylight / Cool White / Warm White), switchable with a simple on–off toggle.
✅ Brightness: 750 lumens.
✅ Memory Mode: Remembers the last setting if used for more than 7 seconds.
✅ Beam Angle: 110°.
✅ Fixture Size: 115 × 32 mm, cut-out Ø 95 mm.
✅ Long Lifespan: up to 25,000 hours.
✅ Eye & Skin Safe: free from UV and infrared radiation.
✅ Certified Safety: IEC 62471 compliant for eye protection.
✅ Eco-Friendly: mercury-free and environmentally safe.
✅ Built-in Surge Protection for safer use.
✅ Warranty: 1 year.
✅ Setup Function: synchronize light settings by toggling the switch on and off for approx. 10 seconds.

Installation Instructions

1.Cut a circular opening in the ceiling with a diameter of 95 mm.
2.Strip approximately 10 mm of insulation from the power cable. (Recommended cable size: 1.5–2.5 mm in diameter, with conductor diameter of 0.8–1.5 mm. If using small multi-core wires, solder the conductor tips before installation.)
3.Connect the prepared wires to the terminal block, ensuring the wires are firmly secured and cannot move. Arrange the wires neatly, then lift the springs to fix the downlight securely into the ceiling opening.


Warnings & Precautions

✅ Always switch off the power before installation, inspection, or cleaning.
✅ Do not replace or install while the power is on or when hands are wet.
✅ Do not modify or use with non-standard accessories.
✅ Keep out of reach of children and away from high-heat areas.
✅ Do not use if any parts are damaged.
✅ Installation or repair must be carried out by a qualified electrician only.
✅ Do not misuse the product or attempt to modify the LED downlight.

This website uses cookies for best user experience, to find out more you can go to our Privacy Policy  and  Cookies Policy